CREWS
- Debri will be cleaned up at the end of each day.
- Unless requested equipment & tools will not be left on site.
- Unless a spot is designated materials will not be left on site.
CLEARING
- We will remove trees as specified (at an additional cost). In most districts we can not remove Live Oaks.
- Unless agreed upon we will not change the elevation of your property.
- Fence lines will be cleared of vegatation wide enough for the project to be completed. If you have a flower bed we will take extra care to work around it.
- Debris will be removed by our crew or piled in a stack as desired.
STANDARD LAYOUT & DESIGN:
Wood Fences
- Posts set at 8 foot spacing.
- Post depth between 24 and 36 inches depending on height, can be set in cement or tamped.
- Privacy fences use 1 1/4 ring shank nails (6 per board) for security. Screws can be swapped at an additional charge.
Metal Fences
- Fully welded end horizontal bracing with kicker.
- Post depth between 24 and 36 inches depending on height, set in cement, with support line posts every 120 feet.
- T-Posts or metal posts every 12 feet, at a depth of 23 inches.
- Wire stretched with 8 tons of pressure to ensure rigidity.
Gates, Railings & Bridges
- Privacy and wood walk gates have a 1 1/2 square tube frame to ensure stability over time.
- Gates and railings are full welded to guard agains water entering.
- We follow all ADA guidelines for all railings and bridges.
Back to Top